Installation
Placement, air flow, and secure mounting all play an important part to getting the most from your scent machines. Let’s learn about installation of the D50.
Installation Tips
- Use 3 screws in the wall plate for extra strength.
- Diffusers typically are placed 7ft high on the wall.
- Keep units at least 3 feet from smoke detectors.
Air-Flow Tips
- Look for a place near air flow that will pull scent into the targeted space. If the diffuser is too close to return air vents or doors that open frequently, the scent will be pulled away in the wrong direction.
- One way gauge air flow is to start up a unit, carry it around your space (don’t tip it!), and watch the scent plume for movement. Backlighting the plume can help you see it better.
Programming
Check the instruction manual that comes with the unit for detailed instruction. You can also view programming on the D100 video that is the same process.
Programming Tips
- Your diffusers can be set to the times you need them. If you’re closed at night or weekends, then just program the units to be off during that time.
- Only program while the HVAC system is in operation. If the HVAC blowers are off for the night, then program the unit(s) to be off as well. This will help avoid oils collecting, which can lead to furniture or flooring damage.
Maintenance
If the oils are not atomizing properly, you can check the batteries and run isopropyl alchohol through the unit for 5-10 minutes to clear any obstruction.